Pellet Stove Furnace

Pellet stoves can be used as a second heating source or, with proper venting, as a primary heating option. They are available as freestanding models or as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fireplace.

The auger transports pellets from the hopper into the combustion chamber which is where they burn and produce heat. Sensors detect the flame and adjust the speed of operation in order to maintain a desired room temperature.

1. Energy Efficiency

Pellet stoves burn a renewable non-toxic, non-toxic fuel that is made from compressed sawdust wood chips, bark and other materials normally placed in landfills but which can be used to create an efficient and clean source of heating. They aid homeowners in reducing their energy consumption, and therefore greenhouse gas emissions. Many pellet stove users report that they have recouped their initial investment in just few years through a reduction in their heating bills.

Pellets are more dense and compressed than natural wood, which makes them more efficient to burn. They also produce much less creosote than traditional fireplaces made of wood. They are also packaged in plastic bags that seal out moisture, and require less frequent cleaning.

Like other heating systems pellet stoves must be properly size and vented. A trained technician will be able to assess your venting requirements and space requirements in order to get the most efficient results.

In the process of installation, a hearth will be constructed according to your specifications and the vent is installed through a hole pre-cut in the exterior of your home. The vent is then run out a side wall or through the roof, based on your preference and local regulations.

After the hearth and vent are finished then the pellet stove can be connected and turned on. Some manufacturers provide the option of a remote control to make it easy to start and maintain the fire, while others offer additional sensors that monitor airflow and combustion, flue temperatures, and pressure. When the system detects it needs more pellets or less, it sends a signal to the auger that it should speed up or slow it down according to the need.

All stoves have a hopper for storage that holds between 35 and 130 pounds of pellets until needed. The size of the hopper will determine the frequency at which you have to refill your stove. Larger hoppers allow for longer periods before refills is needed. A grille draws fresh air from the room and then passes it over a heat exchanger, which then blasts heated air into the living area by convection. A grate or auger distributes the pellets, while the pan beneath is used to collect any burned ones along with combustion residue.

Pellet stoves are less energy-intensive than wood-burning models, but aren't as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of stoves require electricity. This could cause an issue in the event of power outage, but backup systems such as batteries and generators are available.

2. Low Maintenance

Pellet stoves are incredibly efficient, but just like any major heating appliance they require some maintenance to keep them running correctly. Cleaning your stove and its exhaust vent on a regular basis will prevent the buildup of harmful creosote. This could cause a fire or explosion that could cause damage to your stove or even your home.

A pellet stove is made up of natural particles that are compressed (such as kernels, nutshells of corn, or small pieces of scrapwood) made from wood or other materials. The pellets are introduced into the combustion chamber via an electric auger. The thermostat you choose controls the rate at which pellets are fed to the burner. The fire can be kept roaring or reduced or even snuffed out according to the temperature you set. When the fire is gone the ash is then thrown into an empty ash tin beneath the burner that can be easily removed and disposed of.

Pellets are created from byproducts of wood processing that could otherwise be thrown away. They are renewable resources and release significantly less particles into the air than traditional wood-burning stoves resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals produced by pellet stoves is significantly lower than that of modern wood stoves that have been certified by the EPA.

Because of the low emissions, these appliances are not required to be vented through chimneys like traditional wood stoves but should be properly vented through a wall or another external structure. Pellet stoves are equipped with flue ports that are located on the rear or top of the appliance. They are connected to a ventpipe which extends out the house.

A pellet stove has one drawback: you have to purchase or store enough fuel pellets to last the whole winter season. On average, owners of pellet stoves use three tons of pellets over the course of the winter, at a cost of $200 for each ton. These costs add up over the years however it's much cheaper than buying and hauling firewood to an old-fashioned wood-burning fireplace or stove. You should purchase enough pellets so that your stove will run throughout the winter's coldest months. Also, you'll must have a space to store the pellets (preferably dry and cool).

3. Reduced Carbon Footprint

Pellet stoves make use get more info of renewable biomass fuel to create heat, reducing dependence on finite fossil fuels. This helps reduce the carbon footprint as well as helping diversify energy sources in homes.

Even the most modern woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions from pellet stoves also are significantly lower than the ones from gas furnaces. Pellets are made from compressed sawdust, bark, and other wood wastes. They can also comprise different materials like soybeans, corn and nutshells, cherry pits and agricultural waste. When they are burned, they release less particles, which can cause respiratory problems and allergies as well as carcinogens and nitrous oxide.

The main difference between wood stoves and pellet stove is the feed system. Pellet stoves come with hoppers that hold the pellets. When the thermostat or sensors signal that the room needs heating, the auger is turned and the pellets are pumped into the combustion chamber where they are burned and generate heat. The air from combustion chamber is pumped through a heat exchanger that transfers heat to the blower. This results in extremely low emissions and no creosote buildup.

After the hopper has been empty, the ash is removed by a cyclone and deposited in an ash container. The stove is equipped with a fan that circulates the heated, clean air into the room. Most pellet stoves are made to operate with minimal maintenance and feature a large viewing window for you and your family to take in the flames.

The quality of pellets is the most important factor that influences pellet stove emissions. Poor-quality pellets will produce more emissions. When selecting your pellets, make sure they meet certain standards and do not contain other ingredients like petroleum-based or urea-based products. Also, look for a manufacturer that offers a guarantee and will repair or replace any part in the event of a problem. Certain states provide homeowners with tax credits if they want to go greener. This is a great option to help offset the initial cost of this type stove and make installation more affordable.

4. Reduced Noise

Pellet stoves emit less smoke and exhaust when compared to wood-burning fireplaces. They also utilize an electric fan to distribute the heat more evenly across the space. This is the reason why pellet stoves require less maintenance than wood stoves. While wood stoves require regular cleaning of particulates and chemicals to prevent their deterioration stoves can be cleaned with an electric vacuum cleaner.

Many manufacturers have made a conscious effort to design their stoves to be simple to install, operate and maintain. Their appliances are available in different styles to match the design of your home. Some models come with a programmable thermostat and remote control as well as a WIFI applications that allow you to monitor and manage your stove from any location in the world.

The majority of pellet stoves come with an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then pumped into the combustion chamber by an auger. The speed at which the pellets are fed to the burner determines how hot the fire is and also the amount of heat produced. The hopper can be filled with either hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can use biomass pellets made of switchgrass and corn. This is an environmentally friendly alternative.

Because pellet stoves burn such an environmentally friendly fuel, they generate less smoke than conventional wood-burning fireplaces and require fewer maintenance. They also don't require a chimney, which makes them a much more suitable choice for new construction or retrofits.

Pellet stoves do not require regular cleaning of creosote or other chemical similar to wood stoves. They only need periodic inspections to ensure the proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. Your appliance dealer can explain the proper procedure for your specific model and brand. They can also provide details about storage and safety and help you find the right fuel for your stove.